The D15 is big, and the Meshify C interior is not. Here are three tips for anyone considering this combo. First, the D15 itself is a two tower cooler. One of the two 150mm fans clips in between the two towers. This fan is mandatory, and the good news is that a D15 with this center fan will fit inside a Meshify C without issue. NH-D15 is good enough for any processor made so far, no matter how hot, so long as you keep it at stock settings. OC is simply forbidden from 12th gen on with an air cooler. But who knows, maybe at the end of this year we'll get a Noctua surprise. 8. Aureste_. So i'm wondering if the following thermal paste's are good alternatives for this CPU? Option 1: Thermalright TFX. Option 2: Thermal Grizzly Kryonaut Extreme. Not looking for undervolt advise or anything else, just looking for good thermal paste that works good with this CPU. Thank you. Sort by: Alternative_Spite_11. my 12700k with Noctua NH-D15 and Fractal Define 7 casing runs Cinebench R23 with 4.9 PCores and 4.0 ECores at max temp of 88 degrees celsius (room ambient is about 29 degrees celsius). i can get it to 5.0 PCore but it will thermal throttle after 15minutes of Cinebench R23 full load. I watched lots of reviews on AIOs and saw that 360mm AIOs It's simpler to install and more reliable. Water cooling would get you a little bit better temps for the noise. For Ryzen 7000 a water cooler probably isn't a bad option, but then neither is a D15 or U12A. If you're going a 7900x or 7950x I would heavily weigh up water cooling. 7600x or 7700x I would probably tend toward high end air cooling mLfna5O.

is noctua nh d15 good